English
हिन्दी

How to use RSI Indicator in Day Trading?
Relative Strength Index (RSI) is a leading momentum indicator which helps in identifying the occurrence of a trend reversal or new trend in advance. 
 
The RSI is a basic measure of how well a stock is performing against itself by comparing the strength of the up days versus the down days. RSI ranges between 0 and 100. 
 
A reading above 70 is considered to be heavily overbought (ready for downward correction), while a reading below 30 indicates oversold (ready for upward correction).
 
Tip - Most traders use RSI simply to buy a stock when the indicator hits 30 and sell when the indicator hits 70. If you buy and sell based on this strategy "YOU WILL LOSE MONEY"
 
RSI is typically used with a 14 period. You may choose to use 5, 10, 20, or even 100 days period. In fact this is how you develop your edge as a trader. You need to analyze what works for you and adopt the same. 
 
Tip - Smaller the period you use to calculate the RSI, the more volatile the indicator will be. For day trading, 10-20 period works well.
 

How to Use RSI Correctly?

  • RSI should be used to identify stocks that are just breaking out of a sideways range
  • When a stock is in continuous uptrend, RSI will remain stuck in the overbought region as it cannot go beyond 100. Hence traders must refrain from selling inspite of strong overbought RSI signal as the stock might keep climbing up following its uptrend.
  • When a stock is in continuous downtrend, RSI will remain stuck in the oversold region as it cannot go below 0. Hence traders should not buy inspite of strong oversold RSI signal as the stock might keep climbing down following its downtrend.
  • The time to sell a stock is when the stock has advanced significantly with an overbought RSI reading.
  • The time buy a stock is when the stock has fallen remarkably with an oversold RSI reading.
 
Tip - If the RSI value is fixed in a region for a prolonged period, it indicates excess momentum and hence instead of taking a reversed position, you can consider initiating a trade in the same direction.

DAY TRADING WITH RSI 

Key components to see in a Valid RSI bottom 

  • Double bottom (RSI hits below 30 twice within 1 hour)
  • High Volume on first price bottom
  • The first bottom on the RSI chart is the first touch of 30 or less in the last 39 bars (typically means half trading day on 5 min chart)

Relative Strength Stop Loss Placement

  • With all trades you must use proper risk management, so stop loss is crucial
  • You can put your stop about 0.2% - 0.4% below the second bottom of this formation

RSI Profit Targets

  • Traders should keep a close eye on the order flow i.e. bid/ask quantity. When the order flow starts dropping you must exit half or all of the position.  

Trading Strategies Using the RSI Indicator

Although the RSI is an effective tool, it is always better to combine the RSI with other technical indicators to validate trading decisions and to reduce false signals.
 
  1. RSI + MACD

  • In this trading strategy, the RSI indicator is combined with the very popular MACD (Moving Average Convergence Divergence)
  • Enter the market only when an overbought or oversold RSI signal is supported by the MACD signal
  • Exit when either of the indicators provides an exit signal
 
 
  • In the above 10 min chart, the green circles show the points where we receive entry signals from both indicators and red circles denote exit points.
  • RSI shows an oversold condition which clearly gives buy signal which is later supported by MACD bullish crossover. Hence we go long on this trade.
  • After few hours, RSI gives an overbought signal. Since our strategy only needs one sell signal, we close the trade on the RSI overbought reading.
 
  1. RSI + MA Cross

  • In this trading strategy, RSI is matched with the Moving Average (MA) crossover. A combination of short MA (typically 4 period) and long MA (13 period) can be used.
  • Buy or sell the stock when an RSI overbought or oversold signal is combined with a supportive crossover of the moving averages. 
  • Hold the position until there is an opposite signal from one of the two indicators or a divergence on the chart.
  • Note - A regular crossover from MA’s is not enough in order to exit a trade. You must wait for a candle to close beyond both lines of the MA’s.

 

  • In the above chart, RSI enters the oversold area with bearish gap open. After few hours RSI exits the oversold territory generating a buy signal which is supported by MA crossover generating second buy signal. As both indicators give buy signal we initiate a buy position. 
  • After few hours of strong up move, RSI enters the overbought area followed by a bearish divergence. This is a very strong exit signal and we must immediately exit.

 

 

डे-ट्रेडिंग में RSI सूचक का उपयोग कैसे करें?
रिलेटिव स्ट्रेंग्थ इंडेक्स (RSI) एक अग्रणी गति संकेतक है, जो ट्रेंड के उत्क्रमण (रिवर्सल) या नए ट्रेंड की अग्रिम स्थिति की पहचान करने में मदद करता है।
 
RSI एक बुनियादी इंडिकेटर है, जो स्टॉक की ऊपरी ताकत की तुलना उसके निचे की ताकत से कर के, उसके प्रदर्शन को मापता है। RSI 0 से 100 के बीच होता है।
 
 70 से ऊपर ओवरबोट (अधिक खरीदारी) माना जाता है, जबकि 30 से नीचे ओवरसोल्ड (अधिक बिक्री) इंगित करता है।
 
TIP - अधिकतर व्यापारि स्टॉक खरीदते है जब RSI सूचक 30 को मारता है, और स्टॉक बेचते जब सूचक 70 हिट होता है। यदि आप इस रणनीति के आधार पर खरीदेंगे और बेचेंगे तो "आप का नुकसान होगा और आप पैसे खो देंगे"
 
आम तौर पर RSI का प्रयोग 14 अवधि के साथ किया जाता है। आप 5, 10, 20, या 100 दिन की अवधि का भी उपयोग कर सकते हैं। आपको विश्लेषण करने की जरूरत है, कि आपके लिए क्या काम करता है, और आप उसका इस्तिमाल करें।
 
TIP - RSI की गणना करने के लिए, आप जितनी छोटी अवधि का उपयोग करेंगे, उतना ही अस्थिर आपका सूचक (इंडिकेटर) होगा।  

RSI का प्रयोग सही तरह से कैसे करें?

  • RSI का इस्तेमाल उन शेयरों की पहचान करने के लिए किया जाना चाहिए, जो कि बग़ल में (साइड वेज़) सीमा को तोड़ रहे हैं।
  • जब एक शेयर निरंतर अपट्रेंड में होता है, तो RSI ओवरबोट क्षेत्र में फंसा रहेगा क्योंकि यह 100 से आगे नहीं जा सकता है। इसलिए व्यापारियों को मजबूत ओवरबोट RSI सिग्नल के बावजूद विक्रय करने से बचना चाहिए क्योंकि शेयर अपनी अपट्रेंड के साथ और ऊपर जा सकता है।
  • जब एक शेयर निरंतर डाउनट्रेंड में होता है, तो RSI ओवरसोल्ड क्षेत्र में फंसा रहेगा क्योंकि यह 0 से नीचे नहीं जा सकता है। इसलिए व्यापारियों को मजबूत ओवरसोल्ड RSI सिग्नल के बावजूद खरीदी करने से बचना चाहिए क्योंकि शेयर अपनी डाउनट्रेंड के साथ और नीचे जा सकता है।
Tip - यदि RSI मूल्य किसी क्षेत्र में लंबे समय तक फसा हुआ है, तो यह अतिरिक्त गति को इंगित करता है और इसलिए एक उलट स्थिति लेने के बजाय, आप उसी दिशा (करंट ट्रेंड) में व्यापार करने पर विचार कर सकते हैं।

RSI के साथ इंट्रा-डे ट्रेडिंग 

मान्य RSI बॉटम 

  • डबल बॉटम (RSI जब 1 घंटे के भीतर दो बार 30 के नीचे जाता है)
  • प्रथम मूल्य बॉटम पर उच्च मात्रा का वॉल्यूम 
  • RSI चार्ट पर सबसे पहला बॉटम, पिछले ३९ कैंडल्स में सबसे पहली बार 30 या उससे कम को स्पर्श करता है (आमतौर पर 5 मिनट की चार्ट पर आधे कारोबार का दिन होता है)

स्टॉप लॉस कहां रखे 

  • सभी ट्रेड्स के साथ आपको उचित जोखिम प्रबंधन का उपयोग करना चाहिए, इसलिए स्टॉप लॉस रखना महत्वपूर्ण है
  • आप अपना स्टॉप लॉस, दूसरे बॉटम से 0.2%-0.4% के नीचे रख सकते हैं

RSI संकेतक का उपयोग करने वाली ट्रेडिंग रणनीतियाँ

हालांकि RSI एक प्रभावी उपकरण है, व्यापार निर्णय को मान्य करने और झूठी संकेतों को कम करने के लिए, अन्य तकनीकी संकेतकों के साथ RSI को जोड़ना हमेशा बेहतर होता है।
 
  1. RSI + MACD

  • इस ट्रेडिंग रणनीति में, RSI सूचक बहुत प्रसिद्ध MACD (मूविंग एवरेज कन्वर्जेंस डिवर्जेंस) के साथ जोड़ा जाता है
  • जब MACD और RSI दोनों सिग्नल का समर्थन होता है, तो मार्केट में प्रवेश करें
  • जब MACD और RSI दोनों में से किसी भी संकेतक से निकास संकेत प्रदान हो, तो मार्केट से बाहर निकलें 
 

 

  • ऊपर दिए गए 10 मिनट के चार्ट में, हरे रंग के घेरे हमे प्रवेश करने का संकेत दे रहे हैं, और लाल घेरे बाहर निकलने का संकेत दर्शा रहे हैं।
  • RSI एक ओवरसोल्ड स्थिति दिखता है जो स्पष्ट रूप से खरीदारी का संकेत दे रहा है, जो बाद में MACD बुलिश क्रॉसओवर द्वारा समर्थित किया गया है। इसलिए हम यहाँ खरीद लेते हैं।
  • कुछ घंटों के बाद, RSI एक ओवरबोट संकेत देता है चूंकि हमारी रणनीति में केवल एक विक्रय संकेत की ज़रूरत है, इसलिए हम RSI ओवरबाट होने पर ट्रेड को बंद कर देते हैं।
  1. RSI + MA Cross

  • इस ट्रेडिंग रणनीति में, RSI को मूविंग एवरेज क्रॉसओवर को साथ इस्तिमाल किया जाता है। छोटी मूविंग एवरेज (आमतौर पर 4 अवधि) और लम्बी मूविंग एवरेज (13 अवधि) का एकसाथ उपयोग किया जाता है
  • जब RSI के ओवरबाट या ओवरसोल्ड सिग्नल के साथ मूविंग एवरेज का क्रॉसओवर भी मिल जाता है, तो स्टॉक को खरीदें या बेचें
  • स्थिति को पकड़ो, जब तक कि दो संकेतकों में से एक पर विपरीत संकेत न हो
 

 

  • ऊपर दिए गए 15 मिनट के चार्ट में, RSI मंदी के अंतराल के साथ ओवरसोल्ड क्षेत्र में प्रवेश करता है। कुछ घंटों के बाद, RSI ओवरसोल्ड क्षेत्र से बाहर निकलते हुए खरीदने का संकेत देता है, जो मूविंग एवरेज क्रॉसओवर द्वारा दूसरा खरीदने के सिग्नल से  सपोर्ट करता है। चूंकि दोनों संकेतक खरीदने का संकेत देते हैं, इसलिए हम खरीदी की  स्थिति को आरंभ करते हैं।
  • मजबूती से ऊपर जाते हुए कुछ घंटों के बाद, RSI ओवरबोट क्षेत्र में प्रवेश करता है, जिसके बाद मंदी का विचलन होता है। यह एक बहुत मजबूत निकास संकेत है और हमें तत्काल बाहर निकल जाना चाहिए।

NOTE: This article is for educational purposes only. Kindly learn from it and build your knowledge. We do not advise or provide tips. We highly recommend to always trade using Stop Loss.